SIZING
TOOL BELTS
|
Climbing or
tool belts are sized according to the
"D" size, which is the measurement
between the D-rings on the tool belt. |
 |
To determine your "D"
size; |
| 1. |
Locate the position where the
D-ring should rest, roughly 4" down from the top of the hip
bone. |
| 2. |
Measure from this point
around the buttocks to the same point on
the other hip. |
FULL
BODY
HARNESSES
|
Bashlin
harnesses are made from 10,000 lb. test woven
nylon web. The webbing is in contrasting colors,
(normally orange and black) for easier donning.
They meet or exceed all ANSI, ASTM and OSHA
requirements. The hardware features a corrosion
resistant coating. The harnesses are available
with many, many options. (Just ask our production
people who have to sort these things out.) |
| Bashlin Harnesses must be sized
properly to function properly. |
Sizing Bashlin
Harnesses
The Bashlin harness is sized according to the
torso of the individual. This involves measuring
for the height and the chest size, then finding
the correct size on the chart, according to the
style of the harness. Height is the first
consideration for proper sizing. However, if the
chest measurement is too large for the
corresponding height, move to the larger size. If
the chest measurement is too small for the
corresponding height, stay with the size dictated
by the height. |
| 683X
Series Harness |
SIZE |
HEIGHT |
CHEST |
| . |
"S" Small |
5'4" - 5'7" |
34" - 36" |
| . |
"M"
Medium |
5'8" - 5'11" |
36" - 40" |
| . |
"L" Large |
6' - 6'3" |
42" - 44" |
| . |
"X" X-tra
Large |
6'4" - 6'6" |
46" - 48" |
| . |
"2X"
Double X Large |
6'6"+ |
48" - 52" |
| . |
"3X"
Triple X Large |
6'6"+ |
52"+ |
| 662A
and 662R Series |
SIZE |
HEIGHT |
CHEST |
| . |
"O" One
Size |
5'4" - 6'3" |
34" - 48" |
| . |
"X" X-tra
Large |
6'3" - 6'6" |
48" - 54" |
| . |
"2X"
Double X Large |
6'6"+ |
54"+ |
BACK
ATTACHMENTS |
|
|
TO
TOP OF PAGE |
|
